How to Avoid Infant Car Seat Installation Mistakes

Infant car seats come with a detachable base that gets semi-permanently installed in the car. The car seat carrier clicks-in to the base. The base shown above is for the Britax B-Safe 35 and includes a tightness indicator that turns green when installed properly
Article By:
Juliet Spurrier, MD
Mom-in-Chief
BabyGearLab

Last Updated:
Thursday
November 5, 2015

Share:
This article is intended to augment our review, Best Infant Car Seats, to help parents be aware of, and avoid, the most common mistakes in car seat installation and use of harness systems.

Installation and Car Seat Safety


Installing car seats using the vehicle seat belt is more challenging than using the LATCH system
Installing car seats using the vehicle seat belt is more challenging than using the LATCH system
A car seat can only offer additional protection for your baby if it is installed correctly. Over half of all children killed are either unrestrained in the car or improperly restrained (FARS: Fatality Analysis Reporting System, NHTSA, 2007).

A 2013-2014 study conducted at the Oregon Health and Science University Hospital showed that 95 percent of parents taking newborns home from the hospital had made at least 1 error when installing their car seat, ones that could lead to injury or death in the event of an accident.

An earlier study by the National Highway Transportation Safety Administration (NHTSA) found that 84% of infant seats exhibited critical misuse, either in the installation of the seat or improper restraint of the infant.

Read Your Vehicle Manual
To ensure you are installing your car seat correctly, you should read the car seat user's manual and your vehicle's manual. Why? The vehicle manual may list different attachment limitations than the car seat manual and the vehicle manual is the overriding authority on how to install the car seat and supersedes the car seat manual if the two conflict. Because some car seats require a change from using the LATCH to the seatbelt for installation when your child reaches a certain weight, it is important to know what the vehicle's limitations are as well. For example, if your car seat manual says LATCH installation can be used for children up to 60lbs, but your vehicle manual has a 50lb limit, then you must use the seatbelt installation at 50 lbs, not 60.

The 9 Most Common Car Seat Mistakes to Avoid


This list of common installation and harnessing mistakes is based on findings from the OSHU study of parents taking newborn infants home from the hospital, in order of most common.

#1. Harness too loose (69%)


The most common mistake made by parents of a newborn is leaving the harness too loose. Follow your car seat's instructions carefully to learn how to properly tighten your harness. Make sure it is tight enough to pass the "pinch test"; the harness is tight enough when you cannot pinch any extra harness material between your fingers and thumb at the shoulder.
Use the pinch test -- when the harness is properly tightened  you should not be able to pinch a section where it passes over the shoulder between your finger and thumb.
Use the pinch test -- when the harness is properly tightened, you should not be able to pinch a section where it passes over the shoulder between your finger and thumb.

#2. Car safety seat installed too loosely (43%)


The car seat base should be installed tight enough that it can only move an inch or less in any direction. Watch this video for tips on installing the base with LATCH, or this one for installing the base with the seat belt.
The Chicco Keyfit 30 base has a single center pull strap that tightens the LATCH anchors to pull the base firmly against the vehicle seat back
The Chicco Keyfit 30 base has a single center pull strap that tightens the LATCH anchors to pull the base firmly against the vehicle seat back

#3. Recline angle of car safety seat incorrect (36%)


Your car seat will have some kind of level gauge or line to help you make sure the angle of the base is properly leveled. Look in your car seat manual for instructions on how to make it properly leveled.
The level indicator on the Phil and Teds Alpha for proper recline adjustment is a free moving ball that works consistently well
The level indicator on the Phil and Teds Alpha for proper recline adjustment is a free moving ball that works consistently well

#4. Retainer clip too low (34%)


The retainer clip should be placed at armpit level. When it is too low there is risk your baby will not be properly restrained in the event of an accident and may suffer a dangerous injury to the abdomen and internal organs.
The retainer clip should be placed at armpit level  as described in your car seat's manual. According to OSHU study  34% of newborn parents have it set too low  placing their infant at increased risk of injury.
The retainer clip should be placed at armpit level, as described in your car seat's manual. According to OSHU study, 34% of newborn parents have it set too low, placing their infant at increased risk of injury.

#5. Safety belt used but not locked (23%)


Installing the base with a seat belt is more challenging, and while it is perfectly safe when properly, we recommend using LATCH anchors due to the increased simplicity and ease-of-installation. If you do choose to install the base using a seat belt, we encourage you to choose one of the car seats that is relatively easy to install using a seat belt. When properly installed, you should not be able to move the base more than 1 inch in any direction. We'd also encourage you to visit your local car seat inspection station and have them check out your seat installation, in your car, before your baby is born. Visiting a car seat inspection station is a good idea in any case, but especially important if you are installing the base using the seat belt. The video below from The Car Seat Lady can help augment reading your car seat and vehicle owners manual, and having your seat belt installation checked at an inspection station:


#6. Use of after-market product not approved with seat (20%)


Avoid the use of add-on products or accessories with your car seat, unless your car seat manual approves their use. Car seats undergo extensive testing, and you may create an untested configuration by using an after-market product with the seat.

#7. Harness too high (18%)


Each seat will have its own way of adjusting the harness height. It is important that the height of the harness be adjusted so it exits the back of the seat at or below your baby's shoulder height. Read your car seat manual for specifics on how to adjust it, and what height it should be at for your baby.
The height of the shoulder strap should be adjusted so it exits the car seat at or below the infant's shoulder height. Read your car seat manual for instructions on the proper height and how to adjust it.
The height of the shoulder strap should be adjusted so it exits the car seat at or below the infant's shoulder height. Read your car seat manual for instructions on the proper height and how to adjust it.

#8. Incorrect spacing between car safety seat and vehicle front seat (17%)


The front seat position should be set so that it will not interfere with the child restraint system. Leave a significant space between the front seat and the car seat, keeping in mind that the seat may move up to an inch based on the normal tightness of the straps, and in the event of an accident, the straps may stretch a bit more. Leaving a clear and free space between the carrier and the front seat makes it easier to be certain the car seat carrier is firmly clicked-into and locked into the base, and allows the child restraint system to properly operate in the event of an accident. Be sure to check your car seat and vehicle owners manual to learn the exact spacing your seat requires.
The diagram above is from the 2012 Toyota Corolla Owners Manual which advises  "Adjust the front seat to that it does not interfere with the child restraint system."
The diagram above is from the 2012 Toyota Corolla Owners Manual which advises, "Adjust the front seat to that it does not interfere with the child restraint system."

#9. Caregiver not knowing how to adjust the harness (15%)


It is important that anyone who will act as a caregiver for your infant knows how to properly use the car seat, and how to properly harness your baby into the seat. Like many baby products, such as monitors and bottle warmers, you'll need to make sure that it is not just you who can operate them correctly, but grandparents and babysitters too.

Helpful Car Seat Installation Tips


Here are a few simple and easy tips to keep in mind. First off, take a look at this video below produced by the National Child Passenger Safety Board. While a bit dry, it is informative and covers both installations with the seat belt and with LATCH anchors:


Buy an Easy-to-Install and Use Car Seat


We believe that such common frequency of mistakes when installing or using a car seat should impact what car seat you ultimately decide to buy. Those seats that are easier to install and use have a real safety advantage. You'll see that in our comprehensive Infant Car Seat Review we have gone to great lengths to examine ease-of-installation and ease-of-use as much as we examine crash test data.

Visit Your Local Car Seat Inspection Station


One thing we urge all readers to seek out, once you've purchased your car seat, is your local car seat inspection station. You can locate a car seat installation check station near you by simply entering your Zip code on the Safer Car website. Typically located at places like your local fire station or police station, car seat inspection locations are staffed by certified Child Passenger Safety Technicians who can help you learn how to properly install your car seat (or just confirm that you've done it right), in your car, and help assure your baby's safety. It is free, and a great national resource. Take advantage of it.

Read the Manual


The UPPAbaby Mesa comes with a positional insert for smaller babies
While manuals are never fun, you should break a sweat when it comes to car seats, and read the manual carefully. In addition, you should read the section in your vehicle owners manual that covers car seat installation. Parents should never assume they know how to install a seat without reading the manual, as each vehicle and seat has its own limitations and restrictions.

We encourage all parents to register their car seats as soon as they purchase them so they can receive information on recalls and safety concerns. The National Highway Traffic Safety Association provides a Recall List on their website that includes information on every recalled seat. Recall lists should be checked for every seat, especially if the seat is second hand.

Conclusion


The high-percentage of improperly installed car seats and/or restrained infants make it crystal clear that it is really easy to make mistakes when installing a car seat, placing a carrier on the base, or adjusting the harness on the baby. We think parents might be prone to making honest mistakes and potential errors when they are in a rush, feeling emotional, or are tired; which is pretty much how new parents feel every day.

We encourage you to take this matter seriously and plan a little extra time for installing and buckling baby in properly every time you use the car seat. In addition, we suggest ALL parents take their new car seat and car to a checkpoint station before the baby is born to learn the ins and outs of proper car seat installation. The experts can help you determine the exact right location and installation options for your specific seat and vehicle. This takes the guesswork out of the process and allows parents to feel confident in their seat installation. Parents should avoid moving the base after the technician installs it and should consider purchasing a second base if they plan to use the car seat in more than one car. The fewer steps parents have to manage each time baby goes for a ride, the fewer opportunities parents have to make a mistake.

Dr. Juliet Spurrier is founder and Mom-in-Chief at BabyGearLab
Juliet Spurrier, MD
About the Author
Dr. Juliet Baciocco Spurrier is a board certified pediatrician, mother of two, and founder of BabyGearLab. Juliet earned her Bachelor of Arts degrees in Anthropology and Italian Literature from the University of California at Berkeley and her Medical degree from Georgetown University School of Medicine in Washington DC. She completed her pediatric residency at the Doernbecher Children's Hospital at Oregon Health & Science University in Portland, OR, and subsequently practiced pediatrics in both the Pacific Northwest and Silicon Valley. Juliet serves as Mom-in-Chief at BabyGearLab, where she oversees all baby product review activity, assuring that each review delivers on our commitment to quality.

  • Share this article:

 

Follow Us


Unbiased.

You Might Also Like